RIGOL User’s Guide M300 Series Data Acquisition/Switch System Nov. 2013 RIGOL Technologies, Inc.
RIGOL VIII M300 User’s Guide General Care and Cleaning General Care: Do not store or leave the instrument where it may be exposed to direct sun
RIGOL Chapter 2 Front Panel Operations 2-54 M300 User’s Guide the channel). Figure 2-22 MC3164/MC3264 Control Interface If the channel curre
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-55 To Control MC3324 MC3324 is a mixed multiplexer with 20 voltage channels and 4 curre
RIGOL Chapter 2 Front Panel Operations 2-56 M300 User’s Guide various operations on the channel currently selected (such as disconnect and close
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-57 invalid. 5 Bank Separate/Bank Joined By default, the first 20 channels of this modul
RIGOL Chapter 2 Front Panel Operations 2-58 M300 User’s Guide To Control MC3416 MC3416 is a 16-channel actuator (ACT-16 for short). This modul
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-59 1 Open Disconnect the channel currently selected. The channel number of the channel cu
RIGOL Chapter 2 Front Panel Operations 2-60 M300 User’s Guide To Control MC3534 MC3534 is a multifunction module (MFC for short). This module co
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-61 and the function is fixed as DIO. For detailed information about the channel configurat
RIGOL Chapter 2 Front Panel Operations 2-62 M300 User’s Guide MC3534 control interface. Read: read the count of the channel currently select
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-63 To Control MC3648 MC3648 is a 4×8 matrix switch and contains 32 two-wire crosspoints
RIGOL M300 User’s Guide IX M300 Overview The M300 series data acquisition/switch system provides 5 slots to accept any combination of 11 kinds of
RIGOL Chapter 2 Front Panel Operations 2-64 M300 User’s Guide Figure 2-31 MC3648 Control Interface 1 Open Disconnect the channel currently sel
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-65 Alarm Channel Setting M300 provides 4 alarm channels (Alarm1, Alarm2, Alarm3 and Alarm
RIGOL Chapter 2 Front Panel Operations 2-66 M300 User’s Guide Latch In this mode, the corresponding pin is latched to the status (high level o
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-67 View Switch M300 provides view switch function which provides multiple display forms f
RIGOL Chapter 2 Front Panel Operations 2-68 M300 User’s Guide “Meas Data” automatically). Please refer to “Store and Recall” to save the data. 3
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-69 Channel Status Table Press at the front panel again to enter the channel status table
RIGOL Chapter 2 Front Panel Operations 2-70 M300 User’s Guide 2 Add Press Add and use the numeric keyboard to input a channel number in the scan
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-71 Channel Information Press at the front panel again and the instrument enters the chan
RIGOL Chapter 2 Front Panel Operations 2-72 M300 User’s Guide Store and Recall M300 allows you to save the system configuration, measurement con
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-73 3 Save Press Save to enter the filename input area. This menu is valid only when the c
RIGOL X M300 User’s Guide Document Overview Main topics in this manual: Chapter 1 Quick Guide This chapter introduces the front panel, rear pane
RIGOL Chapter 2 Front Panel Operations 2-74 M300 User’s Guide system configuration and the measurement configuration. 4 Measurement Data Store
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-75 Utility Press Utility at the front panel to enter the utility interface in which you c
RIGOL Chapter 2 Front Panel Operations 2-76 M300 User’s Guide System Setting Press Utility and the instrument enters the system configuration
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-77 Sound Use the up/down direction keys to select Sound and use the left/right direction
RIGOL Chapter 2 Front Panel Operations 2-78 M300 User’s Guide Scaling Configuration Scaling Configuration OFF A 0 B 1 C 0 x1 0 Unit V Alarm Con
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-79 Separator None Power-on Default Power Key OFF Module Plug No change Brightness 8 Error
RIGOL Chapter 2 Front Panel Operations 2-80 M300 User’s Guide Number of Scans No change Measurement Configuration Function No change Range No ch
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-81 MC3724 S11 and S21 are selected System Related Date No change Time No change Language
RIGOL Chapter 2 Front Panel Operations 2-82 M300 User’s Guide Separator Use the up/down direction keys to select Separator and use the left/righ
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-83 Module Plug None of the current M300 modules are hot-swappable. To avoid damage, you c
RIGOL M300 User’s Guide XI Format Conventions in this Manual: 1. Key: The front panel key is denoted by the format of “Text Box + Button Name (B
RIGOL Chapter 2 Front Panel Operations 2-84 M300 User’s Guide I/O Configuration M300 supports RS232, GPIB, LAN and USB interfaces. After configu
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-85 USB storage device when a scan finishes. Row Limit If “64K” is selected, the file s
RIGOL Chapter 2 Front Panel Operations 2-86 M300 User’s Guide serial port receiving devices via this interface. Press Utility I/O RS232 to
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-87 RTS/CTS This mode is hardware flow control mode and it operates the same as the DTR/
RIGOL Chapter 2 Front Panel Operations 2-88 M300 User’s Guide Tip When all the three IP configuration modes are enabled, the priority of the p
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-89 address. Subnet Mask The format of subnet mask is nnn.nnn.nnn.nnn, for example, 255
RIGOL Chapter 2 Front Panel Operations 2-90 M300 User’s Guide System Information Press Utility Info to view the model, serial number and versi
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-91 System Update M300 can update the system by reading the update file stored in the USB
Chapter 3 To Use External DMM RIGOL M300 User’s Guide 3-1 Chapter 3 To Use External DMM You can connect the M300 with an external DMM and configure
RIGOL Contents XII M300 User’s Guide Contents Guaranty and Declaration ...
RIGOL Chapter 3 To Use External DMM 3-2 M300 User’s Guide To Connect Instruments 1 Make sure that the DMM module is not installed in the M300 o
Chapter 3 To Use External DMM RIGOL M300 User’s Guide 3-3 5 To connect the signals to be measured into the external DMM Use the External Port for An
RIGOL Chapter 3 To Use External DMM 3-4 M300 User’s Guide To Configure the Instruments 1 To configure the external DMM Set the external DMM to
Chapter 3 To Use External DMM RIGOL M300 User’s Guide 3-5 Scan Control Method The typical scan control method based on the connection shown in Figur
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-1 Chapter 4 Remote Control This chapter introduces the method to control M300 remotely. You can b
RIGOL Chapter 4 Remote Control 4-2 M300 User’s Guide User-defined Programming Users can select desired programming tool (such as LabVIEW, Matlab
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-3 1 2 3 4 5 6
RIGOL Chapter 4 Remote Control 4-4 M300 User’s Guide Using RS232 Interface: Convert the [RS-232/Alarms/Ext Trig] interface at the rear pan
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-5 To Use PC Software You can control the instrument remotely by sending SCPI commands using PC so
Contents RIGOL M300 User’s Guide XIII Configuration Copy ... 2-38 Channel Moni
RIGOL Chapter 4 Remote Control 4-6 M300 User’s Guide please follow the corresponding prompt messages to solve the problem. 5 View device resour
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-7 To Control M300 through USB 1 Connect the devices Connect M300 (USB Device) with your PC (USB
RIGOL Chapter 4 Remote Control 4-8 M300 User’s Guide
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-9 To Control M300 through RS232 1 Connect the devices Convert the [RS-232/Alarms/Ext Trig] inter
RIGOL Chapter 4 Remote Control 4-10 M300 User’s Guide 5 Communicate test Right click the resource name “M300 (ASRL1::INSTR)” and select “SCPI
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-11 To Control M300 through LAN 1 Connect the devices Connect M300 to your computer or the LAN of
RIGOL Chapter 4 Remote Control 4-12 M300 User’s Guide (a) (b) 4 View device resource The resources found will appear under the “RIGOL Online
Chapter 4 Remote Control RIGOL M300 User’s Guide 4-13 5 Communication test Right click the resource name “M300(TCPIP::172.16.3.157::INSTR)” to selec
Chapter 5 Troubleshooting RIGOL M300 User’s Guide 5-1 Chapter 5 Troubleshooting This section lists some questions and failures which might occur whe
RIGOL Contents XIV M300 User’s Guide AC Characteristics ... 6-3 Fr
RIGOL Chapter 5 Troubleshooting 5-2 M300 User’s Guide disappears. 4) If the problem remains, please restart the instrument. 6. How to change t
Chapter 5 Troubleshooting RIGOL M300 User’s Guide 5-3 11. The GPIB interface does not work normally? 1) Check whether the cable works normally and t
Chapter 6 Specifications RIGOL M300 User’s Guide 6-1 Chapter 6 Specifications DC Characteristics Accuracy Specifications: ± (% of reading + % of r
RIGOL Chapter 6 Specifications 6-2 M300 User’s Guide Measuring Characteristics DC Voltage Input Impedance 200mV, 2V, 20V ranges: 10MΩ or >1
Chapter 6 Specifications RIGOL M300 User’s Guide 6-3 AC Characteristics Accuracy Specifications: ± (% of reading + % of range) [1] Function Range[2]
RIGOL Chapter 6 Specifications 6-4 M300 User’s Guide 300.000V 3Hz-5Hz 1.00 + 0.02 1.00 + 0.03 1.00 + 0.03 0.100 + 0.003 5Hz-10Hz 0.35 + 0.0
Chapter 6 Specifications RIGOL M300 User’s Guide 6-5 [4] Specifications are for sine wave input >5% of range. For inputs from 1% to 5% of range an
RIGOL Chapter 6 Specifications 6-6 M300 User’s Guide Frequency and Period Characteristics Accuracy Specifications: ± (% of reading) [1] [2] Fu
Chapter 6 Specifications RIGOL M300 User’s Guide 6-7 Measuring Characteristics Frequency and Period Measurement Method Reciprocal-counting technique
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-1 Chapter 1 Quick Guide This chapter guides users to quickly get familiar with the front/rear pane
RIGOL Chapter 6 Specifications 6-8 M300 User’s Guide Temperature Characteristics Accuracy Specifications [1] Function Probe Type Type Optimum
Chapter 6 Specifications RIGOL M300 User’s Guide 6-9 Measuring Characteristics Thermocouple Conversion ITS-90 software compensation Reference Junc
RIGOL Chapter 6 Specifications 6-10 M300 User’s Guide Module Specifications MC3120/MC3132/MC3164/MC3232/MC3264/MC3324/MC3416/MC3648 Multiple
Chapter 6 Specifications RIGOL M300 User’s Guide 6-11 Capacitance LO-Earth 200pF 200pF 200pF <200pF <200pF 200pF <200pF 200pF Volt-Hertz Lim
RIGOL Chapter 6 Specifications 6-12 M300 User’s Guide Alarming Match or mismatch, maskable Match or mismatch, maskable Speed 4ms (Max) alarm sa
Chapter 6 Specifications RIGOL M300 User’s Guide 6-13 General Specifications Display 4.3 inches Power Supply AC 100V - 120V, 45Hz - 440Hz AC 200V
Chapter 7 Appendix RIGOL M300 User’s Guide 7-1 Chapter 7 Appendix Appendix A: Accessories and Options List Description Ordering No. Mainframe M
RIGOL Chapter 7 Appendix 7-2 Appendix B: Warranty RIGOL warrants that its products mainframe and accessories will be free from defects in
Index RIGOL M300 User’s Guide 1 Index 2WR ... 2-14 4WR ... 2-14 Absolute T
RIGOL Chapter 1 Quick Guide 1-2 M300 User’s Guide General Inspection 1. Inspect the shipping container for damage. Keep the damaged shipping co
RIGOL Index 2 PERIOD ... 2-14 Power Switch ... 2-82 Power-off Status ...
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-3 Appearance and Dimensions Figure 1-1 Front View (Unit: mm) Figure 1-2 Side View (Unit: mm)
RIGOL Chapter 1 Quick Guide 1-4 M300 User’s Guide Front Panel Figure 1-3 Front Panel of M300 1 LCD 4.3 inches high-resolution color LCD di
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-5 In all-channel monitor function, you can monitor all the channels in the scan list. Control th
RIGOL Chapter 1 Quick Guide 1-6 M300 User’s Guide When the instrument is in local mode, pressing this key can lock the front panel. At this p
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-7 8 Menu Softkeys Correspond to the menus on the screen. Pressing any softkey can enable the corresp
RIGOL Chapter 1 Quick Guide 1-8 M300 User’s Guide Rear Panel 1 2 3 4 5 Figure 1-4 Rear Pa
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-9 external interface (namely Analog Bus Interface). The analog bus interface is a 9-pin female interf
RIGOL Chapter 1 Quick Guide 1-10 M300 User’s Guide together to control the measurement. Alarms/Ext Trig Interface Note: The Pin 5 output
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-11 Power On and Inspection 1 Connect the power (1) Adjust the power voltage selector at the rear p
RIGOL Chapter 1 Quick Guide 1-12 M300 User’s Guide User Interface Figure 1-5 User Interface 1. Status Bar Help Displayed when the built-in
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-13 To Input Filename M300 supports filenames consisting of Chinese characters, English letters and
RIGOL M300 User’s Guide I Guaranty and Declaration Copyright © 2013 RIGOL Technologies, Inc. All Rights Reserved. Trademark Information
RIGOL Chapter 1 Quick Guide 1-14 M300 User’s Guide 4 Switch the Input Mode Press Ch/A/a to switch the input mode to Chinese, English uppercas
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-15 Plug-in Module Overview The M300 provides 11 kinds of modules. These include a DMM module, 20-cha
RIGOL Chapter 1 Quick Guide 1-16 M300 User’s Guide Insert the Module into the Mainframe Please turn the mainframe off and insert the modules fol
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-17 Module Overview MC3065 (DMM Module): The DMM module is used to measure the signals under test and
RIGOL Chapter 1 Quick Guide 1-18 M300 User’s Guide isolated inputs to the DMM module. MC3232 is divided into two banks (A and B) of 16 two-wire c
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-19 totalizer count during a scan. Four 8–bit digital input/output (DIO) ports 4 totalizer (TOT
RIGOL Chapter 1 Quick Guide 1-20 M300 User’s Guide To Use the Built-in Help System The built-in help system of M300 provides the help informatio
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-21 Measurement Connections Multiple signals to be measured are connected to the plug-in modules thro
RIGOL Chapter 1 Quick Guide 1-22 M300 User’s Guide 1. Place the terminal block with the front (with the RIGOL caption) facing downward and pul
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-23 Taking M3TB32 as an example, the detailed layout is as shown in the figure below. From the left bo
RIGOL II M300 User’s Guide Safety Requirement General Safety Summary Please review the following safety precautions carefully before putting the
RIGOL Chapter 1 Quick Guide 1-24 M300 User’s Guide Table 1-2 Measurement Connections DCV/ACV/FREQ/PERIOD/Sensor (DCV, FREQ) +
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-25 3. Connect the terminal block to the module via interface 1 (the interface definition is in Figur
RIGOL Chapter 1 Quick Guide 1-26 M300 User’s Guide To Replace the Fuse If a new fuse is required, please refer to the following steps. 1 Turn o
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-27 Menu Quick Navigation This section provides the structures of the main menus for M300 to guide
RIGOL Chapter 1 Quick Guide 1-28 M300 User’s Guide Monitor View Switch Key
Chapter 1 Quick Guide RIGOL M300 User’s Guide 1-29 Control Alarm Channel Setting Keys
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-1 Chapter 2 Front Panel Operations This chapter introduces in details the front panel o
RIGOL Chapter 2 Front Panel Operations 2-2 M300 User’s Guide Scan Configuration Press Config at the front panel to configure M300 to create a sc
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-3 (each English letter or number occupies 1 byte and each Chinese character occupies 2 byt
RIGOL M300 User’s Guide III Failures. If you suspect damage occurs to the instrument, have it inspected by qualified service personnel bef
RIGOL Chapter 2 Front Panel Operations 2-4 M300 User’s Guide 5 Advanced Source (Available only when the DMM module is not installed or disabled)
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-5 6 Absolute Time Absolute time is defined as the time when the instrument executes the s
RIGOL Chapter 2 Front Panel Operations 2-6 M300 User’s Guide To Edit the List Press ConfigEdit to enter the scan list editing interface. Figu
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-7 5 Search When a great number of channels are added into the scan list, you can press Pa
RIGOL Chapter 2 Front Panel Operations 2-8 M300 User’s Guide Trigger Mode The M300 provides 5 trigger modes including auto trigger, manual trigg
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-9 alarm data in the non-volatile memory automatically. You can press at the front panel
RIGOL Chapter 2 Front Panel Operations 2-10 M300 User’s Guide To use the absolute time trigger mode, set an accurate system time for the instrume
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-11 To use the alarm trigger mode, configure the alarm by referring to “Alarm Configuration
RIGOL Chapter 2 Front Panel Operations 2-12 M300 User’s Guide Channel Configuration After creating a new scan list and configuring proper parame
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-13 Measurement Configuration The first step in the channel configuration guide: select th
RIGOL IV M300 User’s Guide Safety Terms and Symbols Terms Used in this Manual. These terms may appear in this manual: WARNING Warning stateme
RIGOL Chapter 2 Front Panel Operations 2-14 M300 User’s Guide Explanation: If you want to configure the channel of the multiplexer (MC3132, MC31
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-15 Scaling Configuration The second step of the channel configuration guide: configure th
RIGOL Chapter 2 Front Panel Operations 2-16 M300 User’s Guide If the channel using the scaling function is removed from the scan list, the scalin
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-17 Alarm Configuration The third step of channel configuration guide: configure the alarm
RIGOL Chapter 2 Front Panel Operations 2-18 M300 User’s Guide 1 Select the Alarm Mode Enter the alarm configuration interface, Mode is selected
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-19 outside the range but when you press OK, an error prompt message will be displayed. The
RIGOL Chapter 2 Front Panel Operations 2-20 M300 User’s Guide Advanced Configuration The fourth step of the channel configuration guide: configu
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-21 Channel Configuration When Using External DMM For the multiplexer channels, if the DMM
RIGOL Chapter 2 Front Panel Operations 2-22 M300 User’s Guide Measurement Parameter Configuration This section introduces the measurement parame
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-23 To Set the Range The setting modes of range include “Auto” and “Manual”. In auto range
RIGOL M300 User’s Guide V Allgemeine Sicherheits Informationen Überprüfen Sie diefolgenden Sicherheitshinweise sorgfältigumPersonenschäde
RIGOL Chapter 2 Front Panel Operations 2-24 M300 User’s Guide Integration Time The Integration time is the period of time that the instrument’s
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-25 Auto Zero Auto Zero (AZ) is applicable to DCV, DCI, 2WR, 4WR, TEMP (RTD and RTD 4W) an
RIGOL Chapter 2 Front Panel Operations 2-26 M300 User’s Guide Offset Compensation The Offset compensation setting is applicable to the 2WR, 4WR,
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-27 Gate Time Gate time (also called Aperture Time) applies to FREQ or PERIOD function. It
RIGOL Chapter 2 Front Panel Operations 2-28 M300 User’s Guide Table 2-4 Auto Delay Time (a) DCV/DCI/TEMP (TC)/SENSOR (DCV/DCI) (all the ranges):
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-29 Temperature Measurement Parameters The parameters to be set in temperature measurement
RIGOL Chapter 2 Front Panel Operations 2-30 M300 User’s Guide Precision After setting the temperature sensor type to TC, use the up/down direc
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-31 variation information. Thermistor is especially sensitive to temperature but its temper
RIGOL Chapter 2 Front Panel Operations 2-32 M300 User’s Guide Any Sensor Measurement Parameters Any sensor measurement supports DCV, 2WR, 4WR an
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-33 Start Value and Coefficient Setting Explanation: When setting the start value and fitt
RIGOL VI M300 User’s Guide oder Austausch von Teilen am Gerät, sowie am Zubehör dürfen nur von RIGOL autorisiertem Personal durchgeführt werden.
RIGOL Chapter 2 Front Panel Operations 2-34 M300 User’s Guide Digital Input The multifunction module has four non-isolated 8-bit digital input/o
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-35 8-bit S01 XXXXXXXX S02 XXXXXXXX S03 XXXXXXXX S04 XXXXXXXX 16-bit S02S01 XXXXXXXXXXXXXXX
RIGOL Chapter 2 Front Panel Operations 2-36 M300 User’s Guide Totalizer The multifunction module provides four 32-bit totalizers (TOT) which can
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-37 instrument. 5 Threshold For TOT channels “S07” and “S08”, after selecting the trigger
RIGOL Chapter 2 Front Panel Operations 2-38 M300 User’s Guide Configuration Copy The configuration copy function supports module copy, channel c
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-39 Module Copy Module copy can copy the configuration of a module (source module) to anot
RIGOL Chapter 2 Front Panel Operations 2-40 M300 User’s Guide Channel Copy Channel copy can copy the configuration of a channel (source channel)
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-41 it) and press Done to execute the channel copy. You also can press Switch to fix the c
RIGOL Chapter 2 Front Panel Operations 2-42 M300 User’s Guide Extended Copy Extended copy allows copying the configuration of a channel (source
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-43 Channel Monitor The channel monitor function of M300 allows users to monitor a single
RIGOL M300 User’s Guide VII Sicherheits Begriffe und Symbole Begriffe in diesem Guide. Diese Begriffe können in diesem Handbuch auftauchen: WAR
RIGOL Chapter 2 Front Panel Operations 2-44 M300 User’s Guide 1 Channel Number The channel number is in the editable status. At this point, you
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-45 8 System Time Display the system time. Key Points: 1 For single-channel monitor fun
RIGOL Chapter 2 Front Panel Operations 2-46 M300 User’s Guide Module Control The M300 provides a user-friendly module control interface. Press C
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-47 To Control MC3120 MC3120 is a 20-channel multiplexer (MUX-20 for short). MC3120 is div
RIGOL Chapter 2 Front Panel Operations 2-48 M300 User’s Guide Figure 2-15 MC3120 Control Interface (Bank Joined) If the channel currently selec
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-49 5 Bank Separate/Bank Joined By default, this module is in “Bank Joined” state (namely
RIGOL Chapter 2 Front Panel Operations 2-50 M300 User’s Guide To Control MC3132/MC3232 MC3132 is a 32-channel multiplexer (MUX-32 for short).
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-51 Figure 2-18 MC3132/MC3232 Control Interface (Bank Joined) If the channel currently se
RIGOL Chapter 2 Front Panel Operations 2-52 M300 User’s Guide 5 Bank Separate/Bank Joined By default, this module is in “Bank Joined” state (nam
Chapter 2 Front Panel Operations RIGOL M300 User’s Guide 2-53 To Control MC3164/MC3264 MC3164 is a 64-channel single-ended multiplexer (MUX-64 for s
Comments to this Manuals