Rigol DG1000 Series Specifications download pdf (Page 21)

RIGOL

Quick Guide for DG1000

Output Setting

The two yellow buttons located at the right of front panel shown as

follows are for controlling the channels output and counter input:

Figure 14 Channel /Counter Connector

Channels output

 Connect the connector shown above with an external device by

BNC cable.

 Press the corresponding “Output” button to start channel

outputting. Meanwhile, the backlight of “Output” button turns

on and a “ON” sign appears in user interface. To turn off the

channel output, press “Output” again.

Counter Input

The counter enables to measure frequency (100mHz~200MHz),

period, duty cycle and positive/negative pulse width of a input

signal.

 Press  Count to enter the counter mode, meanwhile,

the “Output” button of CH2 is turned off and channel output is

closed automatically.

 Connect the generator with external device by BNC cable, so as

to input external signal into the counter.

CH2 Output/Counter

Input Connector

CH1 Output Connector

1 2 ... 16 17 18 19 20 21 22 23 24 25

No comments

Rigol DG1000 Series Specifications Page 21