Rigol DG2000 Series Specifications download pdf (Page 24)

RIGOL

Quick Guide for DG2000

Troubleshooting

1. If the screen does not turn on even if the generator is

on, please follow the steps below:

(1) Check if the power is correctly connected.

(2) Check if the power switch is really on.

(3) Restart the instrument after taking the above steps.

(4) If it does not work correctly, contact RIGOL for our

service.

2. If the settings are correct but no waveform is

generated, please follow the steps below:

(1) Check if the Signal Line is correctly connected to the

[Output] terminal.

(2) Check the BNC if it works correctly.

(3) Check the Output key, if it is turned on.

(4) Press Utility  System  Setting  PowOn  Latest

when all the above steps have been finished. Restart the

computer.

3. The U-disk cannot be recognized:

(1) Check if the U-disk can work normally.

(2) Make sure the U-disk is USB flash disk. The generator

doesn’t support hard drive-based U-disk.

(3) Restart the instrument, reinsert the USB device and check

it.

(4) If the U-disk still does not work normally, please contact

RIGOL.

1 2 ... 19 20 21 22 23 24

No comments

Rigol DG2000 Series Specifications Page 24