Rigol DG2000 Series User's Guide Page 140
- Page / 159
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
RIGOL
© 2006 RIGOL Technologies, Inc
User’s Guide for DG2000 Series
4-10
Data Overflow
Sine Wave frequency upper limit=40MHz
The Sine wave frequency upper limit is 40MHz. If the specified frequency is higher
than 40MHz, the system will adjust the frequency to 40MHz automatically.
Sine Wave frequency lower limit= 1μHz
The Sine wave frequency lower limit is 1μHz. If the specified frequency is lower than
1μHz, the system will adjust the frequency to 1μHz automatically.
Square Wave frequency upper limit=40MHz
The Square wave frequency upper limit is 40MHz. If the specified frequency is higher
than 40MHz, the system will adjust the frequency to 40MHz automatically.
Square Wave frequency lower limit=1μHz
The Square wave frequency lower limit is 1μHz. If the specified frequency is lower
than 1μHz, the system will adjust the frequency to 1μHz automatically.
Ramp Wave frequency upper limit= 400kHz
The Ramp wave frequency upper limit is 400kHz. If the specified frequency is higher
than 400kHz, the system will adjust the frequency to 400kHz automatically.
Ramp Wave frequency lower limit= 1μHz
The Ramp wave frequency lower limit is 1μHz. If the specified frequency is lower than
1μHz, the system will adjust the frequency to 1μHz automatically.
Pulse Wave frequency upper limit=16MHz
The Pulse wave frequency upper limit is 16MHz. If the specified frequency is higher
than 16MHz, the system will adjust the frequency to 16MHz automatically.
Pulse Wave frequency lower limit= 500μHz
The Pulse wave frequency lower limit is 500μHz. If the specified frequency is lower
than 500μHz, the system will adjust the frequency to 500μHz automatically.
Arb Wave frequency upper limit= 12MHz
The Arb wave frequency upper limit is 12MHz. If the specified frequency is higher than
12MHz, the system will adjust the frequency to 12MHz automatically.
Arb Wave frequency lower limit= 1μHz
The Arb wave frequency lower limit is 1μHz. If the specified frequency is lower than
1μHz, the system will adjust the frequency to 1μHz automatically.
Sine Wave period upper limit= 1Ms
The Sine Wave Period upper limit is 1Ms. If the specified period is greater than 1Ms,
the system will adjust the period to 1Ms automatically.
Sine Wave period lower limit= 25ns
The Sine Wave Period lower limit is 25ns. If the specified period is less than 25ns, the
system will adjust the period to 25ns automatically.
- DG2041A 1
- Safety Notices 4
- Safety Terms and Symbols 6
- Content 9
- Chapter 1 Getting Started 11
- General Inspection 12
- Handle Adjustment 13
- The Front/Rear Panel 14
- The Rear Panel at a Glance 16
- The DG2000 User Interface 17
- To Set a Waveform 18
- and 50% Duty Cycle 19
- Low level, Pulse 19
- To Set Modulate/ Sweep/Burst 21
- To Set Trigger/Output 23
- To Use Digital Input 24
- The Menu/Graph Mode 28
- To Set Sine Signals 29
- To Set the Output Amplitude 31
- To Set the DC Offset 32
- To Set Square Signals 33
- To Set the Duty Cycle 35
- To Set Ramp Signals 36
- To Set the Symmetry 37
- To Set Pulse Signals 38
- To Set the Pulse Width 40
- To Set the Edge Time 41
- To Set Noise Signals 42
- To Set Arbitrary Signals 43
- To Generate Sweep 68
- Sweep Frequency Setting 70
- To Generate Burst 71
- Set the N-Cycle Burst 72
- Set the Gated Burst 74
- To Store and Recall 75
- To Save the Instrument State 76
- To Save Data 77
- To Use USB storage 80
- To Save a File 81
- To Set the Utility Function 84
- To Set the DC Output 86
- To Set the Sync Output 87
- To Set Output Parameter 89
- To Set the I/O 92
- To Set the System 98
- is set to be 0 111
- were set 117
- Prompting Messages 131
- Error Messages 135
- Conflict Settings 136
- changed due to Amplitude 138
- Data Overflow 140
- Troubleshooting 147
- Chapter 5 Specifications 149
- Specifications 150
- General Specifications 154
- Chapter 6 Appendix 155
- Appendix B Warranty 156
- Appendix D Contact RIGOL 158
Related products and manuals for Power generators Rigol DG2000 Series
(149 pages)© 2020, manymanuals.com. All rights reserved. | 0.116 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals