Rigol DM3058 Specifications download pdf (Page 217)

RIGOL

Programming Guide for DM3058

5-101

Parameters:

Name

Type

Range of Values

Default

Consecutive

Integer

0~3600

Required

parameter

Explanations:

TRIGger:DELay□{<seconds>|MIN|MAX|DEF}: Set the delay time.

TRIGger:DELay?□[{MIN|MAX}]: Queries the delay time between trigger signal

and starting measurement.

In continuity test and diode test, delay time is not set.

For AC measurement, the delay time is affected by bandwidth.

The command ―CONFigure‖ or ―MEASure?‖ can be used to set automatically delay

time.

The command ―TRIGger:DELay‖ can be used to set delay time as well as disable

auto delay function (TRIGger:DELay:AUTO).

It is suggested that the command ―SENSe:<function>:RANGe:AUTO□OFF‖

should be used to disable autorange function, the command ―SENSe:<function>:

RANGe‖, ―CONFigure‖ or ―MEASure?‖ be uesd to set range by manual.

Return Format:

The query returns the delay time between trigger signal and starting

measurement.

3. TRIGger:DELay:AUTO

Command Format:

TRIGger:DELay:AUTO□{ON|OFF}

TRIGger:DELay:AUTO?

Function:

The command sets or queries the enable state of trigger autodelay function.

Explanations:

TRIGger:DELay:AUTO□{ON|OFF}: Enable or disable trigger autodelay function.

TRIGger:DELay:AUTO?: Query the enable state of trigger autodelay function.

The command ―TRIGger:DELay‖ can be used to set delay time as well as disable

auto delay function (TRIGger:DELay:AUTO).

1 2 ... 212 213 214 215 216 217 218 219 220 221 222 ... 263 264

No comments

Rigol DM3058 Specifications Page 217