Rigol DP832 User Manual download pdf (Page 62)

RIGOL Chapter 2 Front Panel Operations

2-12 DP800 User’s Guide

displayed between the CH1 and CH2 areas in the user interface.

Method 2

 Select the "Independent" tracking mode

Press Utility  System  Track Set  Track to select "Independent".

 Enable the track functions of CH1 and CH2

Select CH1 and press Track to select "On". At this point, the track function

of CH1 is enabled and the tracking status icon

is displayed between

the CH1 and CH2 areas in the user interface. Use the same method to

enable the track function of CH2.

Then, select CH1 or CH2 and press Voltage and set the desired voltage. At this

point, the voltage setting value of the other channel changes accordingly. For

example, set the voltage of CH1 to +5V; the voltage of CH2 will change to +5V

automatically.

Note: At this point, both of the voltage setting values of CH1 and CH2 can be

set.

To Track the On/Off Status of the Channel Output

Press Utility  System  Track Set  On/Off to select "Enable" or "Disable".

 Disable: the output status of the other channel will not be affected when the

output of a channel is turned on or off.

 Enable: for channels (the channels should be of the same instrument) that

support the track function, the tracking status of the on/off status of the channel

output is related to the number of channels of which the track functions are

enabled.

 If only the track function of a single channel is enabled (please refer to "To

Enable the Track Function"), the output of the other channel will be

turned on or off at the same time when the output of this channel is turned

on or off. At this point, the output status of the channel of which the track

function is not enabled cannot be set and can only change with that of the

channel of which the track function is enabled.

 If the track functions of the two channels are both enabled (please refer to

"To Enable the Track Function"), the output of the other channel will be

turned on or off at the same time when the output of a channel is turned on

or off. At this point, the output status of both of the two channels can be

set.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 143 144

No comments

Rigol DP832 User Manual Page 62