Rigol DG1000 Series User's Guide download pdf (Page 38)

RIGOL

User’s Guide for DG1000 Series

2-12

To Set Pulse Signals

Press Pulse button, in the Normal Mode, the operation menu will appear at the

bottom of the screen, see Figure 2-17. Set the Pulse parameters by using the

operation menu.

The parameters for Pulse waveforms are: Frequency/ Period, Amplitude/ High Level,

Offset/ Low Level Pulse Width and Duty Cycle. See Figure 2-18. In the operation

menu, select Width, and the corresponding parameter will be displayed in inverse

color for which users can make a change.

Figure 2-17 Pulse Signal Parameter Setting Interface

Figure 2-18 Operation Menu

Table 2-4 Pulse Signal Operation Menu

Term Explanation:

Pulse Width: The time span between thresholds of 50% of the rising edge

amplitude to the next 50% of the falling edge amplitude.

Function

Settings Explanation

Frequency/

Period

Setting the signal’s frequency or period; the

current parameter will switch at a second press.

Amplitude/

High Level

Setting the signal’s Amplitude or High Level; the

current parameter will switch at a second press.

Offset/Low

Level

Setting the signal’s Offset or Low Level; the

current parameter will switch at a second press.

Width/

DtyCyc

Setting the Pulse Width or Duty Cycle for Pulse

Waveform.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 149 150

No comments

Rigol DG1000 Series User's Guide Page 38