Rigol DG1000 Series User's Guide download pdf (Page 89)

RIGOL

User’s Guide for DG1000 Series

2. To Set the Inverse Waveform

Press Utility Æ Output Æ Inverse, to set the inverse Waveform output.

No offset voltage will change while the waveform is inversed. An inverse waveform

will be displayed in the Graph Mode.

Figure 2-76 Normal Waveform

Figure 2-77 Inverse Waveform

3. To Adjust the Phase

Press Utility Æ Output Æ Phase, enter the following interface.

Set the Phase use the unit of degree.

Figure 2-78 Setting the Phase

Normal

Inverse

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 149 150

Waveform Generator 1
Safety Notices 4
PP to 10VPP (50 Ω) 8
PP to 20VPP (High Z) 8
Content 9
Chapter 1 Getting Started 11
General Inspection 12
Handle Adjustment 13
The Front/Rear Panel 14
Figure 1-6 16
The DG1000 User Interface 17
To Set a Waveform 18
PP Amplitude and 0 20
To Set Modulate/ Sweep/Burst 21
To Set Trigger/Output 23
To Use Digital Input 24
The Menu/Graph Mode 28
To Set Sine Signals 29
To Set the Output Amplitude 31
To Set the DC Offset 32
To Set Square Signals 33
To Set the Duty Cycle 35
To Set Ramp Signals 36
To Set the Symmetry 37
To Set Pulse Signals 38
To Set the Pulse Width 39
To Set Noise Signals 40
To Set Arbitrary Signals 41
To Set Counter 53
To set the Auto measure 54
To set the coupling mode 54
To set the sensitivity 55
To set the Trig Level 56
FSK Frequency 64
To Generate Sweep 67
Sweep Frequency Setting 69
To Generate Burst 70
Set the N-Cycle Burst 71
Set the Gated Burst 73
To Store and Recall 75
To Save the Instrument State 76
To Save Data 77
To Use USB storage 78
To Save a File 79
To Set the DC Output 84
To Set the Sync Output 85
To Set Output Parameter 87
Inverse 89
To Set the I/O 90
To Set the System 91
PP /0.000 VDC 96
Duty Cycle 104
DC and Symmetry of 80% 105
DC” to set the Offset as 107
DC Offset 108
Æ AC/DC, choose “AC”; 119
Æ Sensitivity Æ Medium; 119
Prompting Messages 121
Common Prompt Messages 121
Error Messages 125
Conflict Settings 126
RMS) upper limit =3.536Vrms 128
RMS connects to a 50 ohm 128
RMS automatically 128
Data Overflow 130
Troubleshooting 138
Warranty 139
Contact RIGOL 140
Chapter 6 Appendix 141
Specifications 142
RIGOL 143
PP - 10 VPP (50 Ω) 144
PP - 20 VPP (High Z) 144
Trigger mode 147
Resolution: 6 mV 147

Comments to this Manuals

No comments

Rigol DG1000 Series User's Guide Page 89

Comments to this Manuals