Rigol DG1000 Series User's Guide download pdf (Page 39)

RIGOL

User’s Guide for DG1000 Series

2-13

To Set the Pulse Width

(1) Press Pulse Æ Width, to set the Pulse Width.

The Pulse Width shown on the screen is the default value when the instrument is

powered or the set value beforehand. When changing the function, if the current

value is valid for the new waveform, it will be used sequentially.

(2) Input the desired Pulse Width

Use the keypad or the knob to input the desired value, choose the unit, and press the

corresponding button. The Generator will change the waveform immediately.

Figure 2-19 Setting the Pulse Width

In the Graph Mode, the waveform is shown in Figure 2-20.

Figure 2-20 Waveform parameters in the Graph mode

Note: Pulse width and Duty cycle are equivalent, once a parameter is changed, the

other one will change accordingly. For instance, the current period is1ms, the pulse

width is 500µs and the duty cycle is 50％, when setting the pulse width to be 200µs,

the duty cycle will become 20％.

Current Parameter:

Pulse Width

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 149 150

No comments

Rigol DG1000 Series User's Guide Page 39